Application:
HZGS-208 automatic dielectric loss tester is a high-precision dielectric loss tangent value and capacitance test instrument for various high-voltage power equipment in power plant, substation and other fields or laboratories. The instrument is an integrated structure with built-in dielectric loss test bridge, variable frequency voltage-regulating power supply, booster transformer and SF6 high stability standard capacitor. The test high voltage source is generated by the inverter inside the instrument and is used for the test of the test object after the transformer is boosted. Frequency can be changed into 50Hz, 47.5Hz\52.5Hz, 45Hz\55Hz, 60Hz, 57.5Hz\62.5Hz, 55Hz\65Hz, digital notch wave technology is adopted to avoid interference of power frequency electric field on the test, which fundamentally solves the problem of accurate measurement under the interference of strong electric field. At the same time, it is suitable for the detection of generator power supply after power failure. The instrument is equipped with insulation oil cup and temperature control device to test insulation oil dielectric loss.
Features:
1.Super LCD display
Operation is simple. The instrument is equipped with a high quality full-touch LCD screen and a super-large full-touch operation interface. Each process is very clear and clear. It is an ideal intelligent dielectric loss measuring device at present.
2.Mass storage data
The instrument is equipped with a calendar chip and a large-capacity memory, which can store 200 sets of data. The test results can be saved in chronological order, the history can be viewed at any time, and the output can be printed.
3.Scientific and advanced data management
Instrument data can be exported through U disk, and can be viewed and managed on any PC through our company's special software.
4.Multiple test modes
The instrument can be tested by internal high voltage, external high voltage, internal standard, external standard, positive wire method, negative wire method, self-excitation method and other methods.High voltage (greater than 10kV) dielectric loss can be achieved under external standard external high voltage.
5.CVT test by one step at a time
The instrument can also test the dielectric loss and capacitance of CVT (capacitive voltage transformer) C1 and C2, realizing the simultaneous test of C1 and C2.The instrument can also test the CVT ratio and voltage Angle difference.
6.Measuring CVT without removing high voltage lead
The instrument can correctly measure the dielectric loss and capacitance of CVT without removing the high voltage lead of CVT.
7.CVT negative wire shielding method measuring C0
The instrument can measure the dielectric loss and capacitance of C0 at the upper end of CVT by negative wire shielding method.
8.High speed sampling signal
The inverter and sampling circuit inside the instrument are all controlled by digitalization, and the output voltage is continuously adjustable.
9.Multiple protection is safe and reliable
The instrument has multiple protection measures such as input voltage fluctuation, high voltage current, output short circuit, power supply fault, over-voltage, over-current, temperature and so on, which ensures the safety and reliability of the instrument.The instrument also has the function of grounding detection to ensure that ungrounded devices are not allowed to boost voltage.
Main Parameters:
| 1 |
Working condition |
-15ºC~40ºC |
RH<80% |
| 2 |
Anti-interference principle |
variable-frequency method |
| 3 |
Power supply |
AC 220V±10% |
Permissible generator |
| 4 |
High Voltage Output |
0.5KV~10KV |
Every other 0.1kV |
| Accuracy |
2% |
| Max current |
200mA |
| Capacity |
2000VA |
| 5 |
Self-exited power supply |
AC 0V~50V/15A |
50HZ,60HZ single frequency
45HZ/55HZ
47.5HZ/52.5HZ
55HZ/65HZ 57.5HZ/62.5HZ
Automatic dual frequency conversion |
| 6 |
Resolution |
tgδ: 0.001% |
Cx: 0.001pF |
| 7 |
Accuracy |
△tgδ:±(reading*1.0%+0.040%) |
| △C x :±(reading*1.0%+1.00PF) |
| 8 |
Measurement range |
tgδ |
unrestricted |
| C x |
15pF < Cx < 300nF |
| 10kV |
Cx < 60 nF |
| 5kV |
Cx < 150 nF |
| 1kV |
Cx < 300 nF |
| CVT test |
Cx < 300 nF |
| 9 |
CVT ratio range |
10~10000 |
| CVT ratio precision |
0.1% |
| CVT ratio resolution |
0.01 |
| 10 |
Size of host machine (mm) |
350(L)×270(W)×270(H) |
| Size of accessory case (mm) |
350(L)×270(W)×160(H) |
| 11 |
Memory size |
200 sets support U disk data storage |
| 12 |
Weight of host machine |
22.75Kg |
| Weight of accessory case |
5.25Kg |
Company Profile
Wuhan Hezhong Electric Equipment Manufacture Co., Ltd is a high-tech enterprise professionally engaged in R & D, manufacture and marketing of power testing products, instruments, power industry automation systems for 20 years.We export completed set to Korea, Singapore, Vietnam, India, Ecuador, Paraguay, Pakistan, Philippines, Russia, Italy, Austria, Portugal, Chile such as PD test system, impulse voltage generator, temperature rising test system, transformer comprehensive test system, cable fault detect system and varies of instruments for transformer, circuit breaker, switchgear, lightning arrestor, insulator, cable, battery,SF6 gas and so on.
Competitive Products
Certifications
Customer Visit
On-site Service
Package and Delivery
Audited Supplier 
Competitive Products
){kind=link}